What should Land Rover do if it finds an oil spill in Shen Xing?

More than 90% of the oil leakage problems are caused by the long-term alternate replacement of the rubber sealing ring inside the gearbox, which leads to a large loss of plasticizers and softeners, leading to corrosion, aging and hardening of the sealing ring. At first, there was an oil leak. Slowly, the oil dripped. After a long time, the sealing ring is broken. The causes of oil leakage in Land Rover Shen Xing gearbox are as follows: 1. Oil seal aging and deformation, oil seal spring falling off or oil bag in the wrong direction will lose the oil retaining effect; 2. Replace the aging oil seal, pay attention to the installation direction of the oil seal, and the side of the oil seal with the spring ring faces the oil side; 3. The journal is skewed or drooping, which is not closely matched with the oil seal, resulting in oil leakage. Some worn or sunken journals should be replaced or repaired. Most of the transmission oil leakage basically starts from the crankshaft rear oil seal, the first shaft oil seal and the half shaft oil seal. Transmission oil leakage is quite common, but once it leaks, it will form a channel, making the oil leakage more and more serious.