How to disassemble BYD s7 throttle and how to clean BYD s7 throttle?

1. No disassembly and cleaning is required.

Disassembly-free cleaning is relatively simple, and there is no need to replace some sealing rings, gaskets and other parts. At present, in most cases, disassembly and cleaning are adopted.

2. Remove all throttle bodies and clean them.

If the oil plug is particularly serious, it needs to be removed and cleaned. If the situation is serious, even the cylinder head should be uncovered for cleaning. Therefore, it is recommended that all car owners and friends go to a professional maintenance shop to clean the throttle.

Air conditioning and cleaning process of antifreeze production equipment. What do you think of the rearview mirror? Coolant tracking and positioning headlamp modification

How to clean the throttle yourself?

Tools needed: carburetor cleaner, gloves, toolbox.

1. Remove the throttle.

Remove the engine cover, and remove the pressure pipe and the pipeline fixed on it. The owner should pay attention to the fact that in the process of disassembling and assembling screws, it is necessary to prevent the screws from falling into the engine compartment.

After removing the pressure pipe, you can see the throttle of Golf 6. Because the throttle valve is in a low position and there are many pipelines around it, the owner should be careful when disassembling the throttle valve to avoid damaging the pipeline.

When the throttle valve is removed, the engine block will be exposed. The owner must keep this empty position and remember to block the exhaust pipe to prevent foreign objects from entering the engine block.

2. Clean the throttle.

After taking out the throttle valve, we can find that there are many oil stains inside and outside the throttle valve, and a lot of dirt and impurities are attached to it.

After spraying detergent on the dirty parts, you can wipe them carefully with a cloth. Don't be lazy when wiping, especially pay attention to those cracks that are easy to hide evil and shelter evil. If the gap is too small, you can clean it with a cotton swab dipped in detergent.

As long as we wipe it carefully, the throttle will be as clean as new. A clean throttle can make your car "breathe" smoothly. Let's leave now.

3. Install the throttle valve.

The four screws for fixing the throttle can be screwed by hand first, because the hand is sensitive, so it is not necessary to screw the screws directly with the sleeve. After tightening by hand, it can be fixed firmly with tools. Then plug it in. It takes a little effort to install the plug After listening to "Da", the display is fixed.

After installing the valve, you can install the hose. There will be two small grooves on both sides of the hose, one large and one small, which can be aligned with the big and small raised marks on both sides respectively. Both ends of the hose should be fully inserted. If the installation is difficult, you can twist the installation left and right. After the concave and convex points at both ends are completely aligned, touch the bottom of the hose by hand to ensure that the bottom is completely nested. After tightening the screws on the iron hoop and installing the engine decorative cover, the cleaning work is completely completed.

@20 19