How to open the fuel tank cover of mg6, switch diagram of MG6 fuel tank cover.

The fuel tank cover of MG6 is located at the left rear side of the vehicle, and the fuel tank cover lock is connected with the central locking system. When the door lock is unlocked, press the right side of the fuel tank cover to open it. Then slowly turn the fuel tank filler cap counterclockwise. After filling, reinstall the filler cap and tighten it until you hear three clicks. If the vehicle is parked in direct sunlight or at high temperature, please do not fill up the fuel tank, because fuel expansion may lead to fuel overflow. The design of oil filler tube is suitable for long and sharp oil filler. There is a cover plate at the neck of the oil filler, which can be completely opened when the oil filler is completely filled before refueling. Start the engine after refueling. If the engine is not running smoothly, please turn off the engine, do not start it again, and immediately contact the 4S shop for maintenance. After the fuel system is used for a period of time, the dust in the air and impurities in gasoline will block or block the oil circuit, and the carbon deposit and gum produced during combustion will also attach to the intake and exhaust valves, intake and exhaust passages, throttle valves and combustion chambers. At this time, using fuel system cleaning agent to clean the fuel system can obviously reduce the emission of harmful substances in automobile exhaust, help automobile exhaust detection reach the standard, restore engine power, and improve engine efficiency and fuel economy.