How to use the air gun tool of the car

Air cannon is a kind of pneumatic tool, and it is named pneumatic wrench because it makes as much noise as a gun when working. Its power source is compressed air output by air compressor. When compressed air enters the air gun cylinder, it drives the internal impeller to rotate, generating rotating power. This is an efficient and safe tool for disassembling and assembling screws.

What should I pay attention to when using the wind cannon correctly?

1. Spindle oil and sewing machine oil (sewing machine oil) are designated for lubrication of air guns (pneumatic tools). Do not use ordinary engine oil or recycled engine oil, otherwise it will seriously damage internal parts.

2. Please use this tool under the air pressure of 8 ~ 12 kg/cm2 during operation. Too low air pressure will not give full play to the ability of tools, and too high air pressure will quickly reduce the life of tools.

3. If there is no oiler, please refuel at the specified oiling port before and after work, so that the machine can play its best function.

4, regularly check whether there is sewage and impurities in the filter device, if there is, should be timely drainage (generally 1 times/week).

5, check whether there is any leakage and looseness on the air hose and joint, in case the compressed air pressure into the pneumatic tool is not enough.

6. Check whether the pneumatic tool itself and its accessories are connected reliably, so as to avoid damaging the tool or hurting people when rotating at high speed.

7. Non-pneumatic tool accessories shall not be used for pneumatic tools.