How to adjust the air pressure of airbag seat

The air pressure adjusting device of the airbag seat of Pacific Auto Network is located under the seat. The seat automatically rises and falls through the button on the left side of the seat, and the height of the lower seat is adjusted. The button of the seat height is connected with the control valve, and the height of the seat can be adjusted by inflating and deflating the airbag. Adjusting the damping of the seat can change the damping and soft and hard changes of the seat, and then adjust the front and rear position of the lower seat.

The air pressure adjusting device of airbag seat is under the seat, which can adjust the height, backrest angle and seat position of the seat. So as to improve ride comfort and comfortableness in that driving proces of the automobile and make passengers more comfortable to drive.

Instructions for use of airbag shock-absorbing seat:

1, damping limit wrench. In the case of bad road conditions and serious bumps, you can move the limit handle and fasten the hook to protect the shock absorption system.

2. Slide the adjusting handle. Lift up to release the limit and the seat cushion can move back and forth.

3. Front lifting handle. Upward lifting can make the cushion lift forward, and the angle and height of the cushion can be adjusted.

4. Lift the handle at the back end. Lift up to raise the rear end of the seat cushion.

5. Angle adjuster handle. Lift upward to release the limit, and the backrest angle can be adjusted.

Maintenance reminder of shock absorption control valve under airbag seat

1. Daily check the shock absorber for oil leakage, such as whether the connecting pin, connecting rod, connecting hole and rubber bushing of the shock absorber are damaged, desoldering, broken and falling off.

2. Further check whether the fit clearance between the piston and the cylinder is too large, whether the cylinder is strained, whether the valve seal is good, whether the valve disc and the valve seat are closely matched, whether the extension spring of the shock absorber is too soft or broken, and take measures to grind or replace parts according to the situation.