How to repair the broken headlight adjuster? How to repair the fault of headlight adjusting screw

Headlights are an indispensable accessory when car owners often drive at night. For the driving environment and driving habits, in order to get a better view, the headlight adjuster will be used to adjust the height of the headlights. If the headlight adjuster is broken, it can be repaired, but most 4s shops or repair shops will not repair the headlight adjuster, but directly replace the assembly inside the headlight adjuster, because replacing the headlight adjuster assembly is a shortcut to repair the headlight adjuster, so few 4s shops or repair shops will waste time to repair it.

The repair method of headlight adjustment screw fault is:

1, remove the headlights;

2. Lever out the adjusting screw seat of the low beam base that needs to be replaced;

3. If the adjusting screw on the left side of the headlight is broken, the tangent can be adjusted from right to left. On the contrary, if the adjusting screw on the right side of the headlight is broken, the left and right tangents can be adjusted.

4. Then use the headlight adjustment switch on the car to adjust the height of the whole tangent to a suitable height.

Adjustment method of vehicle lighting:

1. Main driving position, there will be a headlight height adjustment knob under the left rear side of the steering wheel;

2. The headlight height adjustment knob 1 has four gears: 0, 1, 2, 3;

3, 0 is the gear with the lowest height, and 3 is the gear with the highest height;

4. The owner can adjust the lighting height according to the needs of the driving environment.