How to set the section of Toyota Highlander sensor

Toyota Highlander sensor needs to be adjusted according to the relevant manual. Different sensors have different adjustment methods. Automobile sensor is the input device of automobile computer system, which can convert all kinds of information of automobile, such as vehicle speed, medium temperature and engine working condition, into electrical signals and transmit them to the computer. In this way, the engine of the car can be in the best working condition. Sensor failure is shown in the following figure: 1. Symptoms of damage to the speed sensor include: the engine is unstable at idle speed, the vehicle suddenly stops or turns off when slowing down or stopping, the acceleration performance of the engine is reduced, the speed display on the instrument is biased, and the engine fault light is on. 2. The throttle position sensor is damaged: If the throttle position sensor is out of balance, the correct ignition advance angle and air-fuel ratio of the mixture cannot be guaranteed. Therefore, it should be accurately adjusted to the specified voltage reading. If the adjustment is too low, the exhaust gas recirculation system will not provide enough exhaust gas in time, and knocking will occur when accelerating. If the adjustment is too high, the exhaust gas recirculation system will react too fast and provide too much exhaust gas, thus reducing the power. 3. Damage of coolant temperature sensor includes: engine idling instability, fire, flameout or increased fuel consumption. The manufacturer stipulates that the resistance value of the coolant sensor should be tested with a multimeter at different working temperatures. Therefore, the adjustment of Toyota Highlander sensor needs to be carried out in accordance with the relevant manual. Different sensors have different adjustment methods.