Audi A6L's oil burning power is a bit poor, can you change it to a good oil?

Use high-quality engine oil: the engine oil is easy to corrode and age at high temperature for a long time, which makes the oil film thinner and easier to escape to the combustion chamber to participate in combustion, so the use of high-quality engine oil can greatly delay this phenomenon.

Pay attention to the cleanliness of fuel oil circuit: fuel will inevitably produce carbon deposit during combustion. Carbon deposit is the root cause of some automobile failures, such as the aging of valve oil seal and the widening gap between piston and cylinder wall, which are directly or indirectly related to the formation of carbon deposit, so keeping fuel oil circuit clean is of great help to prevent engine oil burning.

Causes of burning engine oil

The piston ring is worn or installed in the opposite position during packaging.

Crankcase vent is blocked, which leads to high oil pressure, increased backflow resistance and carbon deposition caused by staying on the inner wall of cylinder for a long time.

Valve oil seal aging failure. Under the influence of the vacuum degree of the intake pipe, the engine oil enters the cylinder from the gap between the valve stem and the guide hole for combustion.

Refer to the above? Baidu encyclopedia-Shao engine oil