Old Bora throttle model

Basic setting: When the ignition switch is turned on, the throttle control unit and the engine control unit can adapt themselves. Basic setting process: the throttle is basically set, and the throttle regulator enters the minimum position from the maximum position during emergency operation. If there is too much sludge in the throttle, it may lead to poor engine acceleration and increase fuel consumption. When cleaning the throttle, it is not necessary to disassemble it, but the sealed part of the air inlet must be cleaned, and the idle motor must be disassembled to clean it. After cleaning, reinstall it according to the previous disassembly process, and initialize the throttle valve after installation.