How to disassemble BYD Qin accelerator pedal?

First, lift the small cover plate of the lower fixing screw of the accelerator pedal with a small flat-bladed knife. Use 10# tool to remove the fixing screw. Remove the small cover plate of the upper fixing screw of the accelerator pedal with a small flat-bladed knife. Use 10# tool to remove the fixing screw. Pull off plug of accelerator pedal. At this point, you can remove the accelerator pedal. Pay attention to the alignment holes after disassembly.

Throttle, also known as? Air door? ,? Throttle? . Refers to the control device that controls the engine power (thrust). On the piston aero-engine, the throttle valve controls the opening of the carburetor to control the filling amount of the cylinder, thus determining the output power of the engine. On the gas turbine engine, the throttle valve controls the metered fuel flow of the fuel regulator, thus determining the thrust generated by the engine.

The position of the throttle is controlled by the driver operating the throttle lever in the cockpit, and it is transmitted to the carburetor or fuel regulator on the engine through control system components such as pull rod, rocker arm, torsion tube, steel cable, pulley and sector wheel. On an airplane, the throttle lever is always pushed forward to increase power (thrust) and pulled back to decrease power (thrust). (Photo/Text/Photo: Chen Jie 2) @20 19