Land Rover found out how the four tire pressure sensors were matched.

In order to match the tire pressure sensor of Land Rover Discovery 4, you need to perform the following steps:

1. Confirm whether the vehicle is equipped with a tire pressure sensor, and check whether the battery is charged when the sensor works normally.

According to the instructions in the operation guide, before driving, let the tire pressure of the car leak below the standard pressure, then turn on the engine and keep the speed within 8 kilometers (5 miles) per hour.

3. When the vehicle tire pressure leaks, start the tire pressure monitoring system. At this point, the vehicle will recognize the sensor itself and match it with your vehicle. During this process, you will hear some sound prompts.

4. When the system completes the tire pressure sensor matching, you will see that the warning light of the vehicle tire pressure monitoring system goes out, indicating that the tire pressure sensor matching is successful.

Please note that during the matching process, please ensure that there is no interference between the sensor and the vehicle, for example, due to too long distance or other interference signals. In addition, if you don't know how to operate, please consult the vehicle operation guide, or contact the dealer or professional for consultation and help.