How to clean the carburetor of motorcycle is the most convenient?

When the carburetor of motorcycle is in use, there is often sediment and water at the bottom of the carburetor, which affects the normal running of the vehicle. Here is a wonderful way to clean the carburetor without disassembly: first, turn off the oil switch, loosen the oil drain screw at the bottom of the carburetor with a screwdriver, and then turn on the oil switch after all the fuel in the carburetor is drained. After the oil flows out, continue to blow (or inflate) the waste oil discharge pipe on the outer wall of the throttle valve. At this point, mud, sand and water droplets will be found spouting from the oil drain pipe at the bottom of the oiler. Repeat this several times, and the sediment and water in the carburetor float can be cleaned. Then tighten the bottom screw, and the motorcycle can be used normally.