How to adjust the positive and negative air chambers of quick-connect front fork

1. First, release all the air pressure of the front fork, unscrew the top cover of the air chamber with a 28mm sleeve, and take it out completely after loosening.

2. Secondly, apply special grease on the gasket of MAGURA air chamber, and press the gasket of air chamber into the top cover of air chamber.

3. Finally, the top wire should also be oiled, and then the top cover of the air chamber should be put back. Tighten it slightly by hand first, then tighten it with a torque wrench and a 28mm sleeve, with a force of 10Nm, and then you can drive the original air pressure of the front fork.