How to disassemble the intake manifold of Angkor Sela?

Disassembly steps of Angkor Sela air inlet pipe:

1. Disassemble the intake pipe assembly: unscrew the fixing bolt of the intake pipe assembly 1. Take out the intake pipe assembly and tighten the bolts.

2. Remove the air pipe assembly.

3. Turn off the ignition switch and all electrical appliances.

4. Loosen the clamp and disconnect the crankcase ventilation pipe from the air pipe assembly.

5. Remove the upper assembly of intake manifold.

0 1 Turn off the ignition switch and all electrical appliances. Disconnect the negative terminal of the battery. 03 Remove the manual service switch. 04 Remove the electronic throttle body. Remove the intake air temperature and pressure sensor. Loosen the clamp, unscrew the fixing bolt of the crankcase ventilation pipe bracket, and remove the crankcase ventilation pipe. Tightening torque of bolts.