Causes and treatment methods of non-ignition of single-range gas stove.

1, whether to open the gas valve (or stop or cut off the gas). Checking whether the gas is normal is the first step, that is, checking whether the gas has stopped or expired. 2. Whether the battery has not been replaced for a long time. 3, whether to use the correct way to strike a light. Failure to press the knob correctly or turn the knob at an inappropriate angle may also lead to ignition failure, and the flame will turn off as soon as the hand is released. 4. Is the gas stove cleaned regularly? The gas stove has been used for a long time. If the thermocouple is not cleaned in time, it is easy to get dirty or damp, and even block the fire hole around the thermocouple. 5. Clean the thermocouple. 6. Whether it exceeds the service life of the product.

/

Suggested treatment:

1. You can see a battery box under the cooker (single battery is at the lower left of the cooker chassis, and double batteries are at the lower right). Just replace it with a new 1 battery.

2. Press the knob to the end, turn it 90 degrees to ignite, stabilize the voltage for 3-5 seconds, and then let go to ignite.

3. Dredge the fire hole &; If the fire trough is blocked by oil, put the fire cover in hot water, add detergent and clean it with a brush and toothpick, then spin the water in the fire hole and dry it completely before use; You can use a blade or a steel needle to clean the foreign matter in the groove.

4. After cleaning the cooker panel, clean the thermocouple with a dry soft rag or paper towel.

5. According to the National Regulations on Safety Management of Household Gas Burning Appliances, the service life of household gas products (gas cookers and gas water heaters) is 8 years, and that of artificial gas water heaters is 6 years.