Matching method of throttle of Nissan car

What is the manual throttle matching method for passengers?

First of all, you need to turn off the ignition switch, pull out the car key, turn the ignition switch to on after a few seconds, then complete the process of stepping on the accelerator and releasing it, then start the vehicle to keep idling, and finally carry out the acceleration test to complete the manual matching. Stop and wait for about 10 second. Don't pedal while waiting. After about 10 seconds, turn on the ignition switch and wait for about 3 seconds. To quickly and completely press the accelerator pedal and hold it for about 20 seconds until the "MIL" indicator light in the car starts to light up and flash, you must completely release the accelerator pedal. The process of depressing and releasing the pedal usually takes 5 seconds to complete. After completion, start the vehicle engine and keep idling for about 30 seconds. After completing these steps, you can try to accelerate several times, keeping a few seconds interval during the acceleration. After such a series of operations, turn off the engine, pull out the key, wait for about a minute, and restart. As long as the vehicle can run normally, it means that the throttle is completely matched. After manual matching, the on-board computer can delete the original throttle data, re-identify the latest throttle position and angle, and ensure that the replaced throttle can be used safely and efficiently. In addition to manual matching, throttle can also be completed by power-off matching and diagnostic instrument matching.