Traditional Culture Encyclopedia - The 24 Solar Terms - How to clean the engine carbon deposit?

How to clean the engine carbon deposit?

Does your car also have these symptoms: increased fuel consumption, difficult cold start, weakened power, engine jitter, unstable idle speed, worsening exhaust emissions, slow response to speed increase, premature combustion, knocking on the cylinder, etc.

In fact, these symptoms are caused by carbon deposition in the engine. In order to prevent air pollution, engineers design the exhaust gas inside the engine to circulate into the intake pipe and make it burn again. The disadvantage is that it will aggravate the production of carbon deposits. Moreover, because the engine is often in a stop-and-go state, the engine cannot run quickly, the fuel is not fully burned, and the unburned part is easy to form carbon deposits after repeated action at high temperature.

How to clean up the carbon deposit in the engine?

1. Add to fuel tank

2. Pulse carbon removal

3. Cleaning the throttle valve: remove the engine decorative cover, remove the throttle valve, clean it with carburetor cleaner, dry it with cotton cloth and install it.

4. Clean up the carbon deposit inside the engine: open the engine oil cover, pour in the whole tank of cleaning agent (mixed with old engine oil), cover the engine oil cover, turn on the fire and idle for 10 minutes, then turn off the engine. Clean the carbon deposit in the engine. This cleaning agent can dissolve the sludge, colloid, moisture, metal chips and other deposits in the engine, reduce the pollution of new engine oil and prolong the service life of the engine.

What are the benefits of cleaning up carbon deposits in automobile engines?

1. Effectively remove carbon deposits and impurities in fuel injectors, intake necks, air inlets and combustion chambers;

2. Effectively solve the problems of vehicle jitter and oil circuit blockage, keep the idle speed stable, and reduce harmful exhaust emissions;

3. It contains lubricant, which will not damage the oil film on the cylinder wall in the process of removing carbon deposits in the combustion chamber and prevent the engine from coming out.

Abnormal wear and tear;

4. Do not damage various waste gas purification devices and oxygen sensor components.

Reminder: Carbon deposit cleaning is generally done every 20,000 kilometers. It is recommended to replace the gasoline filter at the same time.