Installation method of nozzle of integrated stove

Integrated stove is a kind of kitchen appliances, its use makes cooking more convenient and fast, and can effectively reduce the emission of kitchen fumes. The nozzle of integrated stove is one of the core components of gas stove, and it is very important to install and maintain the nozzle correctly. The following is the installation method of integrated stove nozzle.

1. Prepare the required tools.

Before installing the nozzle of integrated stove, necessary tools must be prepared, including wrenches, torque wrenches, air-tight pliers, etc.

2. Install the gas nozzle

Before installing the nozzle, the gas nozzle must be connected to the gas pipeline. This can be achieved by adding connectors to the trachea. The connector should be tightened with air-tight pliers to ensure firm installation.

Regulating valve

After installing the gas nozzle, adjust the angle of the gas nozzle with a wrench to ensure the normal connection with the gas stove. When adjusting, you need to pay attention to the degree and angle with a torque wrench to make it up to standard.

Installing nozzle

Insert the nozzle into the air nozzle and tighten it with a wrench to the correct torque. The correct waist fit and bayonet form should be adopted during installation, and care should be taken not to damage the nozzle thread.

check

After installation, check whether the nozzle works normally. Therefore, it is necessary to turn on the gas, turn on the knob of the integrated stove, and check whether the gas connection is firm and whether the nozzle works normally.

In these installation steps, please follow the manufacturer's instructions, use the correct tools and safety equipment, and pay attention to the education and risk assessment required for gas use. Be careful when installing the integrated stove to ensure the safety of the operation process.