What's the sound of water flowing in the air refueling door of cylinder 3 Yinglang?

As soon as the Pacific Auto Network stepped on the accelerator, it heard the sound of running water, which should be the water produced by the air conditioning system or the water left by the car. Because the warm air of air conditioner comes from the circulation of engine coolant, and the pipeline position of this part is relatively high, the air is trapped there after replacing the coolant, and a certain amount of water may be formed after a long time.

As soon as you step on the accelerator, you will hear the sound of running water, which should be the water produced by the air conditioning system or the water left in the car. Because the warm air of air conditioner comes from the circulation of engine coolant, and the pipeline position of this part is relatively high, the air is trapped there after replacing the coolant, and a certain amount of water may be formed after a long time.

If the car brakes and hears the sound of water while driving, it means that there is water on the car, which may be that the exhaust pipe is loose or damaged, or that cold water flows through the air conditioner heater. It is suggested that the owner check whether the water in the water tank of the car is reduced, and emptying the air in the water tank can eliminate the sound of this water.

Causes of Abnormal Throttle Noise with Extended Data

1. Throttle is stuck due to carbon deposition, so clean the throttle;

2. The supporting pin of the accelerator pedal is worn. Adding butter can solve the problem. If it doesn't work, replace it.

3. The accelerator cable is not installed correctly. If it is an electronic accelerator, please check the accelerator pedal mechanism and the accelerator pedal sensor.

The operation of the accelerator pedal should be based on the right heel stepping on the cab floor as the fulcrum, and the sole of the foot lightly stepping on the accelerator pedal, stepping down or relaxing with the extension and flexion of the ankle joint. When stepping on the accelerator pedal, the force should be gentle, so that you can step on it gently and lift it slowly.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)