Matching method of mg zs throttle

Pacific Auto Network 1, turn the key to the power gear first, and never start the car, that is, the engine is turned off. 2. After standing for about 15 seconds, quickly step on the accelerator pedal to the end, be sure to step on it quickly, hold on for 15 seconds, and then quickly lift the pedal. 3. Then close the key door, take out the key and let it stand for about 15 seconds. 4. Start the vehicle normally and complete the matching.

When the throttle is reset manually, the telephone switch can be switched on and off several times continuously, and the on-board computer will delete the original throttle memory and store new throttle data. If the verification is successful, the vehicle can be started, which means that the reset is successful. In addition, after the throttle of MG 6 car is replaced, it can also be equipped with a special diagnostic instrument for cars.

Throttle is a controllable valve that controls air to enter the engine. After air enters the intake pipe, it will be mixed with gasoline to form combustible mixture, thus forming combustion work. It connects the air filter and the engine block, and is called the throat of the automobile engine. There are three common methods for automobile throttle matching: manual matching, power-off matching and diagnostic instrument matching. Generally, zero is required after replacing a new throttle or disassembling and cleaning. The matching process is a computer self-learning process, which re-identifies the position and angle of the throttle.

(Photo/Text/Photo: Pacific Auto Network Q&A called Beast)