How to make a hut under the eaves in My World course

My world architecture tutorial eaves hut making method, eaves are the finishing touch of a building, good eaves can add a lot of color to your building, but complex eaves are more complicated to make. The following small series brings you a Chinese eaves, let's take a look.

translate

The same thing started in this hut.

The two beams extend on both sides of the hut, the length of which is about 2-4 squares.

Four pillars were made of spruce at the four corners of the beam.

Turn to the roof, and use spruce to build four small pillars on the roof, the height of which is about 2/5 of that of the big pillar, and the distance from the beam is about 2/5.

At the top of the small beam, use spruce to give 2-4 squares to the outside.

As shown above, build a roof with stones and half a brick.

Filled with original stone and half brick.

Fill the top as described above. It should be noted that the places circled in red in the figure below need to be destroyed when filling.

Then fill the gap between the roof and the main room below with snow. At this time, if it is normal, there will be traces of snow above the roof. Please fill it with original stone and half brick.

Then connect the four corners of the big column with stones and half bricks. Note 1. Just do it before and after. There should be a dividing line between the upper and lower parts in the above picture.

Please fill it up.

Then, on the basis of 1 1, continue to extend outward by about 1/4, and make a cornice according to the method in 6.7.

Install the door and use the hell fence as a window. At this time, you will find that the thickness of the wall is two layers, so not only the outermost wall can be used as a window, but also the inner wall can be used for decoration.