How to match Baojun 730 amt gearbox after maintenance?

Automatic transmission matching method is as follows:

1. Start the vehicle. When the oil temperature reaches 60 degrees or above, ensure that there is no fault code between the engine and the transmission system. Turn the ignition key to the on position. First do engine 060 throttle matching, then do 063 forced downshift matching, and then enter the automatic gearbox. Take X43 1 detection computer as an example, and enter the channel to adjust and match. After entering 000, clear the adaptive learning value, and then proceed to the road.

2.D gear: enter D gear and hold down the brake 10S, release the brake and slide forward for about 20mR gear: directly shift from D gear to R gear, hold 10S, then release the brake and slide backward for about 20m;

3. Repeat this several times, then drive at a high speed of about 20 kilometers, and observe whether the data stream groups 10, 1 1 prompt "adaptive normal". If yes, it indicates that the matching is successful. If not, repeat the above test until it is successful. This matching method can solve the problems of delay in entering D gear and impact in entering R gear, but the premise is that there is no pressure relief inside the wave box.