How to remove the sensor on the air cleaner?

Open the engine compartment cover, disconnect the wiring plug of the intake mass sensor from the intake mass sensor, loosen the fixing clip of the air mass flow sensor wire harness from the air cleaner housing, remove the air cleaner front air outlet pipe clamp, and remove the air cleaner front air outlet pipe from the air cleaner housing. The automobile air intake system has two main functions. First, reduce noise and improve ride comfort.

Introduction of intake air flow sensor

Generally installed on the engine intake pipe, behind the air filter and in front of the throttle body. I.e. between the air filter element and the throttle valve. Intake air flow sensor is a technical term of automobile, also known as "air flow sensor" and "air flow meter". The air flow sensor is an instrument that converts the inhaled air flow into an electrical signal. It is a sensor used to measure the air intake in the automobile air intake system.

The air flow sensor on the car mainly detects the air intake of the engine, and then converts the information of the air intake of the engine into an electrical signal and sends it to the ECU. Then the driving computer will calculate the fuel injection quantity according to the information. The air intake system consists of air filter element, air flow sensor, intake pressure sensor, throttle body, idle speed control valve, power room, intake manifold, etc.