Why is the exhaust valve of Dynasti wall-hung boiler open?

Judging the state according to the direction of rotation, counterclockwise rotation means opening the exhaust valve of Dynastier wall-hung boiler, and clockwise rotation means closing the exhaust valve of Dynastier wall-hung boiler.

The exhaust process of wall-hung boiler mainly depends on exhaust valve and internal automatic exhaust system.

The exhaust valve needs to be opened regularly, installed at the lower part of the wall-hung boiler fuselage, and connected to the exhaust port with a hose until there is water. The automatic exhaust system can automatically perform the exhaust function when the machine is running. If the exhaust is not clean, the pump can start the auxiliary exhaust.

Extended data:

Pay attention to the use of wall-hung boilers in winter.

1, check the water pressure carefully.

When the wall-hung boiler works normally, the pressure gauge value should be between 1.5-2.0bar. If the water pressure in the heating system drops frequently, it should be carefully checked. If there is no water leakage in the wall-hung boiler itself and the equipment is running normally, it may be a water leakage point in the heating system, please contact a professional for inspection and maintenance in time.

2. Adjust the heating temperature

There are very strict restrictions on the water system of floor heating. Usually, the water temperature cannot exceed 60℃, otherwise the heating pipe will easily explode due to high temperature and high pressure, which will shorten the service life of floor heating. The maximum heating temperature of the radiator can be adjusted to 75-80 degrees Celsius.

Step 3 don't touch the pipe

During the operation of the wall-hung boiler, the temperature of the bottom heating, hot water outlet pipe and smoke pipe is high, so it is forbidden to touch it to avoid scalding.