How to disassemble Chang 'an escape throttle?

Changan escape throttle can be disassembled as follows:

Disassembly: 1. Remove intake pipe and/or crankshaft ventilation pipe T20,3. Disassemble the empty filter box, and then you can clean the upper part of the throttle. If you want to clean it thoroughly, please remove the four screws to remove the throttle valve.

Installation: 1. The four screws used to fix the throttle can be tightened by hand first. Because the hand is sensitive, avoid screwing the screw directly with the sleeve. After tightening by hand, they can be fixed firmly with tools. Then plug it in. It takes a little effort to install it. After Hear & amp ldquoDa & amprdquo is clicked once, the display is fixed. 2. After installing the throttle valve, you can install the hose. There will be two small grooves on both sides of the hose, one large and one small, which can be aligned with the raised marks on both sides respectively. Both ends of the hose should be fully inserted. If it is difficult to install, you can screw it at the same time. 3. After the concave and convex points at both ends are completely aligned, touch the bottom of the hose with your hands to ensure that the lower part is completely inserted, tighten the screws on the iron hoop, install the engine decorative cover plate, and the cleaning work is completely completed.

Matching method of Chang 'an escape throttle valve: In the case of hot car, disconnect the negative lead of the battery for not less than three minutes, and install and securely reset the battery pack after three minutes. Then go back to the car and press the start button twice to light up the dashboard (remember not to step on the clutch and brake and not to start the engine directly). After the vehicle self-inspection, press the accelerator pedal to the bottom for more than 5 seconds, and then release it. Release the accelerator pedal, start the vehicle after complete reset, and keep the vehicle speed above 3,000 and not less than 10 second (as long as you press the accelerator pedal slowly, the vehicle speed seems to rise slowly from 1.500, 2000, 25,003,000, and one foot can't control it). After more than 10 seconds, release the throttle and turn off the engine when the vehicle speed drops. Restart the vehicle, and this throttle matching is completed.

Million car purchase subsidy