Changan cs55 how to clean the throttle, changan cs55 how to clean the throttle.

The following is the landlord's personal opinion on how to clean the throttle in changan cs55 and how to clean the throttle in changan cs55:

Throttle is a controllable valve that controls air to enter the engine. After the air enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. There are two ways to clean the throttle in changan cs55:

1. Remove it and clean the throttle body with carburetor cleaner (or directly remove it in the car and spray it before wiping);

2. Use the air inlet to carry out disassembly-free maintenance and cleaning of the engine (get off the bus, then spray the throttle with a cleaning agent or a cylinder with its own pressure, and constantly add and subtract the throttle to keep the engine running). Manual disassembly and cleaning can only clean the throttle valve, and disassembly-free cleaning can also clean the carbon deposit on the top of the piston at the air inlet and valve port, with a wide cleaning range. No matter which method is used, the throttle must be initialized and reset by computer after cleaning the throttle, otherwise the problem of idle jitter will occur.