How to deal with carbon deposit in fuel injector?

The treatment method of carbon deposit in fuel injector is as follows:

1. Hang the cleaner on the front cover of the car, find the oil inlet and oil return pipe of the engine, remove them from their connection points with the engine, select a suitable connector, and plug the oil return pipe with a plug;

2. Remove the oil inlet pipe from the connection point of the engine, select a suitable connector, and connect the oil inlet pipe with the oil outlet pipe of the filter;

3. Open the fuel tank cover, remove the oil pump safety and stop the oil pump.

4. After cleaning, clean up the job site.

Causes of carbon deposit in fuel injector:

1. The brand of throttle oil does not match the compression ratio, and the unsynchronized ignition and combustion of oil molecules will cause incomplete combustion, resulting in carbon deposition on fuel supply system components such as fuel injector, engine combustion chamber, piston ring groove, spark plug, back of intake valve and air intake. The state of synchronization with the rotational speed leads to the overload operation of the engine, and then carbon deposition is formed;

2. Driving on a highly congested road, the vehicle is always in a stop-and-go state, the engine cannot run at high speed, and the fuel or lubricating oil rushing into the combustion chamber cannot burn 100%. The unburned part of the fuel forms colloid under the action of high temperature and oxygen, adheres to the surface of parts inside the engine, and then forms carbon deposit under the action of high temperature;

3. Inferior gasoline contains a lot of gum, which enters the combustion chamber together with gasoline through the fuel supply system of the vehicle, and then burns with gasoline to form carbon deposit.

The cleaning nozzle is used to:

1. Engine power increases and returns to a better state;

2. Keep the engine running smoothly;

3. Reduce tail gas pollution. Million car purchase subsidy