Which screw should I remove for Jaguar Fpace oil change?

The screws that need to be removed when changing the oil in Jaguar Fpace are the screws on the lower oil pan of the engine. Take out the oil and it will flow out. Then, remove the engine and let it run to the working temperature. Then jack up the vehicle, pull down the handbrake and squeeze the front wheel with a wooden wedge.

The use of Jaguar

Put the old oil tank under the oil pan, find the oil drain screw of the oil pan, slowly unscrew the oil screw, let the oil drip for a while, move the oil tank under the oil filter, loosen the oil filter with the oil filter wrench, and then unscrew it by hand. Remember to wear gloves if the oil filter is still hot.

Refer to the user manual to select an appropriate oil filter element and apply new oil to the interface gasket of the new filter element. If the filter element is installed vertically, you can inject some new oil into the filter element to reduce dry grinding at the next engine start. Screw in the filter element by hand and tighten the filter element according to the instructions.