How to Repair 12 Crown Idle Table

1. Unplug the car key, open the hood and find the throttle of the engine.

2. Remove the air filter and intake pipe, unplug the electric socket on the throttle, unscrew the three hexagon screws on the throttle, take out the throttle, and block the air inlet of the engine with a dry rag to prevent dirt from entering the engine.

3. First look at whether the removed throttle is black, and then spray the cleaner, and the dirt will slowly dissolve. At this time, you can wipe it with a paper towel and spray the detergent again, and the throttle will become clean and beautiful.

4. Reverse the disassembly sequence, reset one by one, turn the key to the ignition position, turn it off after 5 seconds, and restore the crown idling table to its original state.