What is the high idle speed of Honda Lingpai?

The reasons for the high idle speed of Pacific Auto Network are air temperature sensor, coolant temperature sensor, throttle position sensor, air flowmeter or intake pressure sensor, switch signal, idle speed control valve, throttle body, fuel injector, vacuum leakage, engine control unit failure or improper matching setting.

Clean the throttle and match. Firstly, the decoder is used to read the data stream of the engine computer, check whether the signal of the sensor is normal, and make a targeted solution according to the abnormal signal to complete the maintenance.

The idle speed of a car refers to a working state. When the engine is idling, it is called idling, that is, the gear of the car is neutral. The idle speed of the engine is called idle speed, which can be adjusted by adjusting the throttle. When the engine is running, if the accelerator pedal is completely released, the engine will be at idle speed. When adjusting the idle speed, the speed should not be high and low, otherwise it will cause early wear and tear to the engine, so it is best to adjust it in the automobile maintenance department.

If the air inlet pipe leaks and the sensor signal is inaccurate, this situation will occur and needs to be detected and solved. The causes of excessive idle speed include air temperature sensor, coolant temperature sensor, throttle position sensor, air flowmeter or intake pressure sensor, switch signal fault, idle speed control valve fault, throttle body fault, fuel injector fault, vacuum leakage, engine control unit fault or improper matching setting, etc.