How to teach the second generation electronic throttle body by itself?

The following contents are applicable to Chang 'an Yidong II (20 18).

1. Turn the ignition switch to the "on" position and wait for 60 seconds.

2. Start the vehicle until the idle state is stable, and then turn off the engine.

3. Turn the ignition switch to the "OFF" position and wait 10 second.

4. self-study is completed.

It should be pointed out that:

● When the electronic throttle body learns by itself, it must ensure that the engine water temperature and intake air temperature are not lower than 5.25℃, and the battery voltage is not lower than 10V (which can be monitored by a diagnostic instrument).

● During the self-learning process of electronic throttle body, no other operations are allowed except the specified actions.