Baojun 560 throttle cleaning

Jun 560 throttle has no fixed cleaning cycle, and the owner can judge whether to clean it according to the state of the vehicle. If there is too much sludge in the accelerator, it may cause poor engine acceleration and increase fuel consumption, which is a big worry for the owner. So what if the throttle is dirty? Going to the 4S shop can be finished quickly, but don't you go to the 4S shop every time? Actually, you can do it yourself, just don't forget to initialize. When cleaning the throttle valve, first ring the fixed metal bundle with a little oil to avoid slipping teeth during disassembly. [1] Remove the metal collar of the throttle hose. After the hose is removed, the left end is the position of the throttle. Take off the negative electrode of the battery, turn off the ignition switch, straighten the throttle, spray a small amount of "carburetor cleaner" into the throttle, and then carefully scrub it with polyester rag or high-spinning "non-woven fabric" and go deep into the throttle that you can't reach. Hold the rag and scrub it carefully. When cleaning the throttle valve, it is not necessary to disassemble it, but the sealed part of the inlet steam must be cleaned, and the idling motor must be disassembled before cleaning. Borrowing and cleaning syringes has advantages and disadvantages. It is generally recommended that the maintenance station should not disassemble and clean to prevent other unnecessary waste, such as the need to replace the sealing ring or install other gaskets after disassembly, or the phenomenon of oil leakage during disassembly and assembly, which will delay the owner's time. After cleaning, follow the disassembly procedure just now, and start the initialization of the throttle valve after installation. It needs to be initialized after cleaning the throttle, because the computer has a memory function when adjusting the throttle opening. Because there was sludge blockage before, in order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.