How to clear the fault light after manual throttle matching by hackers?

Automatic lighting, the lights on the dashboard did not go out after closing the door. This is one of the functions of a car. You can turn off the engine after locking the car. This is not automatic lighting. The lights on the dashboard change with the switch of headlights. When the headlights are turned off, the lights on the dashboard will naturally go out. Fault light, some parts in the car are faulty, such as engine, oil, brake system and water temperature. These need to be eliminated, and the decoder should be used to eliminate the fault code before turning off the lights.

Clear the fault light

Indicating lamp, reminding door, front cover, back cover, etc. They don't close tightly, just deal with related parts according to the indicator light. When the fault light is on, start and stop the vehicle for three times in a row, or unplug the negative electrode of the engine battery, wait for 30 seconds before turning it on, and see if the engine fault light on the instrument panel is still on after the above method is completed.

It should be noted that when the general engine fault light is on, it cannot be eliminated manually. Usually, the fault can only be eliminated after the fault detector is used in the 4S workshop. The trick here is only for the false failure of the engine. If it fails, please go to the 4S store to eliminate it. The sensors mentioned here include water temperature, crankshaft position, air flow, intake air temperature and oxygen sensors. When these sensors are damaged,