How to disassemble and clean Chang 'an Xiao Ye throttle?

Chang 'an Ye's method of removing the throttle: The throttle is a controllable valve to control air to enter the engine. After the gas enters the intake pipe, it will be mixed with gasoline to form a combustible mixture, which will be burned to do work. It connects the air filter and the engine block, and is called the throat of the automobile engine. 1. Remove the joint between the air inlet pipe and the empty filter box, and the pliers; 2. Remove the crankshaft ventilation pipe T20；; 3. Open the empty filter box and break it by hand. Then you can clean the upper part of the throttle. For thorough cleaning, please remove four screws and remove the throttle valve. When replacing or cleaning the throttle, it is necessary to set the throttle basically so that the engine control computer can know the current state of the throttle. The matching method is as follows: when the water temperature reaches above 90 degrees, the key door is opened, but the car does not stop. Turn off all electrical equipment in the car, connect the engine computer with the engine tester, adjust the matching at 04, enter 060 in the channel number after entering, and then start it at 0:00. You will find that the match is successful in less than 30 seconds.