How to adjust the cylinder

The adjustment method of the cylinder is as follows: 1. Two adjustment methods are adopted: one is to put the piston of the cylinder at the compression end, so that the intake and exhaust valves of the cylinder can be adjusted; 2. According to the principle of "three rows of two". That is, the intake valve of cylinder 2 and the exhaust valve of cylinder 3 must be completely closed at this time, and the adjustment can also be checked; 3. For two cylinders with connecting rod shaft diameters in the same plane, only one pair of valves can be adjusted at a time. Therefore, it is also possible to check and adjust the exhaust valves of five cylinders and the intake valves of four cylinders at this time; 4. Turn the flywheel 360 degrees, so that the six-cylinder piston is at the end of compression, and the remaining valves that have not been checked and adjusted will be completely closed; Therefore, by turning the crankshaft twice, all valves of the engine can be checked and adjusted.