How to remove the southeast dx7 throttle?

How to remove the southeast dx7 throttle How to clean the southeast dx7 throttle: First remove the plastic heat shield on the southeast dx7 engine.

When the hood is removed, you can see the throttle. There are some air pipes around the throttle valve. These pipes need to be dismantled, and the location of each pipe should be clearly recorded.

After removing the gas pipe from the throttle, we can remove the whole throttle. Trent's throttle is fixed on the engine block with four bolts, and we can quickly remove it with suitable tools.

The side of the throttle near the combustion chamber is generally dirty with black carbon deposits, which is the main part that needs cleaning.

Cleaning the throttle is mainly to remove carbon deposits on it. We can use special throttling cleaning liquid or detergent. It should be noted here that the cleaning principle of this cleaning agent is to dissolve carbon deposits, and its composition is harmful to human body, so it is best to wear gloves and masks when cleaning.

Spray the cleaning agent to the position with more carbon deposits on the throttle and wait for it to dissolve the carbon deposits for about 5- 10 minutes. Using brushes can speed up the removal of carbon deposits.

When we see that the stain on the accelerator has completely dissolved, we can wipe the detergent inside the accelerator with a clean towel.

Install the cleaned throttle valve on the engine block according to the original position, and then install all the air pipes to complete the whole cleaning process of the throttle valve. After all the hardware is installed, the throttle valve needs to be initialized.

Million car purchase subsidy