Is Volkswagen Bora's throttle sticking to match?

Matching method of Bora throttle: 1. Warm up the engine to normal operating temperature:

1. Turn off the ignition switch and wait at least 10 second;

2. Ensure that the accelerator pedal is completely released, turn the ignition switch to the on position and wait for 3 seconds;

3. Quickly repeat the following operations five times in five seconds. A. completely depress the accelerator pedal, and b. completely release the accelerator pedal;

4. Wait for 7 seconds, fully press the accelerator pedal, and keep this state for about 20 seconds until the MIL stops flashing and starts to light up;

5. Completely loosen the accelerator pedal within 3 seconds after the 5.MIL light is turned on;

6, start the engine, make it idle for a period of time;

7. Idle for more than 20 seconds;

8. Run the engine at high speed for two or three times, and make sure that the idle speed and ignition timing meet the requirements.