Changan Suzuki Tianyu SX4 cleaned the throttle, and the engine was idling at around 1400, which was a little busy. The computer decoder shows that there is no throttle setting.

Today, the same problem has just been solved, as follows: Step 1, turn on the key to the second gear, that is, the gear indicated by the instrument is fully lit, then wait for 20 seconds, press the accelerator to the bottom, hold it for about 10 second, release the accelerator, turn off the ignition switch, pull out the key, and complete the initialization. Step 2: Open the second gear of the key, that is, the gear indicated by the instrument is fully lit. Then wait for 20 seconds, step on the accelerator to the end, light it, release the accelerator immediately after landing, coax the accelerator with your big feet a few times, and it will be OK immediately.