This is English for cars! !

(1) The throttle position sensor is installed at the end of the throttle shaft and provides the ECM with a constantly changing (analog) voltage signal corresponding to the throttle opening.

The throttle position sensor is installed on the main shaft of the throttle end to provide ECM with continuous change (simulation) of the throttle opening according to the voltage signal.

(4) When operating fuel system components, pay special attention to cleaning the pipeline. Dirt entering the fuel system may cause blockage, resulting in poor operation.

When using parts of Fuller system, special attention should be paid to cleaning the pipeline not to enter the fuel system, which may lead to blockage and poor operation.

(5) Idle speed and minxture are under the control of ECM module and cannot be adjusted. Not only can they not be adjusted, but they can't even be checked unless special diagnostic equipment is used.

No matter whether it is idle or minxture, the control of the control module of ECM can be adjusted. Not only can they not make adjustments, but they can't even be selected unless they get special diagnostic equipment.