Fault code of Foshan Shengkai wall-hung boiler

Foshan Shengkai wall-hung boiler is an efficient, energy-saving and environment-friendly household heating equipment. However, even the best equipment may break down.

The following are possible fault codes and solutions of Foshan Shengkai wall-hung boiler:

E0 1: key failure

Solution: If the key problem cannot be solved, the corresponding board needs to be replaced.

E02: poor ignition, flame sensor signal blocked or less fire.

Solution: Check whether the flame sensor is dirty or faulty, and clean or replace the corresponding parts.

E03: Throttle Fault

Solution: Check whether the throttle valve is closed or out of sync, and adjust or replace it accordingly.

E04: Sensor failure

Solution: Check whether the sensor works normally. If it is damaged, it needs to be replaced.

E05: Fan failure

Solution: Check the fan for abnormal sound, disconnection and other problems, which need to be cleaned or replaced.

E06: Safety valve failure

Solution: Check whether the safety valve works normally. If it is damaged, it needs to be replaced.

E07: Piston Pump and Electronic Valve Failure

Solution: Check whether the piston pump or electronic valve is faulty and need to be adjusted or replaced accordingly.

E08: Failure of fire extinguisher and manual valve

Solution: Check whether the fire extinguisher or manual valve is faulty and need to be adjusted or replaced accordingly.

In short, when encountering the failure of Foshan Shengkai wall-hung boiler, do not handle it by yourself, and contact professionals for maintenance as soon as possible to ensure the normal work of the equipment. At the same time, regular maintenance of the wall-hung boiler can effectively extend the service life of the equipment.