Traditional Culture Encyclopedia - The 24 Solar Terms - What is the reason for the high idle speed of Volkswagen LaVida engine?

What is the reason for the high idle speed of Volkswagen LaVida engine?

There are several main reasons for high idle speed:

1, the idle switch is not turned off;

2. Idle speed control valve is faulty;

3. Air inlet pipe leaks;

4. Wrong gas distribution phase;

5. The fuel injector leaks or is blocked;

6. The exhaust system is blocked;

7.EGR valve opens at idle speed.

Solution:

1. Adjust or replace the throttle position sensor;

2. Clean or replace the idle speed control valve, and use a special decoder to basically set the idle speed;

3. Find the leakage point, seal it or replace relevant parts;

4. Check the timing mark and readjust the valve timing according to the standard;

5. Clean and check the fuel injection quantity of each injector to confirm that there is no blockage or leakage;

6. Replace the three-way catalytic converter;

7. Remove the carbon deposit on the EGR valve or replace the EGR valve.

Engine technical characteristics

1, the engine valve drive mechanism adopts the structure of hydraulic bearing ball rocker arm. Compared with the hydraulic tappet valve drive mechanism widely used in general gasoline engines, this new valve drive mechanism has the advantage of relatively small friction torque, so it requires less driving force, which can effectively reduce the power consumption and fuel consumption of the engine.

2. In order to effectively reduce the weight of the whole vehicle, the 1.4 liter gasoline engine adopts aluminum alloy cylinder block, which achieves a very obvious lightweight effect.