How to match the throttle of Wuling Light?

To match the Wuling light throttle, it is necessary to disconnect the negative electrode of the Wuling light battery for a few minutes, so that the Wuling light vehicle can enter the dormant state. In this process, the original memory of the Wuling light vehicle computer will be restored to the factory settings, and then the Wuling light vehicle will be restarted to complete the matching. The specific operation steps of initializing Wuling light throttle are as follows:

1. Open the driving door of Wuling Light. ?

2. Pull the hood switch on the left side of Wuling Light driver's leg. ?

3. Lift the hood of Wuling Light. ?

4. Support the hood of Wuling Light with a support rod to ensure firm support and avoid danger during operation. ?

5. Disconnect the black negative electrode of Wuling Guang Zhi battery, and the vehicle will go to sleep for more than 5 minutes, during which the original memory of the on-board computer will be restored to the factory settings. ?

6. Reconnect the negative pole of Wuling optical battery, twist the Wuling optical key, and start the Wuling optical engine to complete the matching.

Precautions:

After the throttle is cleaned, the throttle needs to be initialized after installation according to the disassembly procedure. After the throttle valve is cleaned, it needs to be initialized, because the computer has a memory function when adjusting the throttle valve opening, because there was sludge blockage in the past. In order to ensure the air intake, the computer will automatically adjust the throttle opening to keep the air intake in a normal state.