How to use the fish tank air regulating valve

How to use the fish tank air regulating valve to install and purchase the submersible pump according to the instructions. Install filters and shower equipment. Then install suction cups and move the whole equipment to the edge of the fish tank. Adjust the height of the pump, then plug in the power supply and the rain will gush out. Unplug the power cord and install the white transparent airway. Connect the upper and lower ends and install.

The adjustment method of the fish tank air regulating valve is to rotate the knob on the air inlet of the air regulating valve. If the fish tank is small, gently rotate the air regulating valve counterclockwise until the air bubbles at the air supply port are slightly discharged. If the fish tank is large, turn the air regulating valve clockwise to the maximum point, that is, the position of the largest mouth in the air regulating valve, so that there is enough oxygen in the fish tank and the garbage in the fish tank can be filtered out. If the fish tank is used normally, the water in the fish tank will be clear and full of oxygen, which is more suitable for the survival of fish.

Function of fish tank air regulating valve

The intake control valve is mainly composed of valve body, valve, piston, cylinder, spring and sealing ring. Its side is equipped with a control block and a control solenoid valve, which integrates the functions of on-off adjustment, load shedding, noise reduction, decompression and parking venting.

When the load is reduced, a small amount of gas is released through the small hole on the valve to balance the suction amount of the small hole on the intake control valve, keep the pressure in the separation oil tank at 0.2 ~ 0.3 MPa, and maintain the normal oil circulation of the air compressor.

The opening and closing actions of the intake control valve are automatically controlled by the pressure sensor and solenoid valve of the regulating system. Whether the opening and closing action of the air intake control valve is flexible is very important to the reliability of the screw machine.