How to adjust the air pressure regulating valve of airbag seat?

The air pressure regulator of the airbag is located under the seat, which can adjust the height, backrest angle and seat position of the seat. So as to improve ride comfort and comfortableness in that driving proces of the automobile and make passengers more comfortable to drive.

Instructions for use of airbag seats:

1. Damping limit wrench. In the case of bad road conditions and serious bumps, you can pull up the limit wrench and fasten the hook to protect the shock absorption system;

2. Slide the adjusting handle. Pull up the release limit, and the cushion can move back and forth;

3. Front end lifting wrench. Lift up to lift the front cushion and adjust the angle and height of the cushion;

4. Rear end lifting wrench. The rear end of the seat cushion can be raised by upward lifting;

5. Angle adjuster handle. Pull up the limit to disengage, and the backrest angle can be adjusted.

Reminder for shock absorption and maintenance of air bag seat lower regulating valve:

1. Check whether the shock absorber leaks oil every day, such as the connecting pin, connecting rod, connecting hole and rubber bushing of the shock absorber. Damage, desoldering, cracking or falling off;

2. Further check whether the fit clearance between the piston and the cylinder is too large, whether the cylinder is tight, whether the valve seal is good, whether the valve disc and the valve seat are closely matched, and whether the extension spring of the shock absorber is too soft or broken. Take measures to grind or replace parts according to the situation. Million car purchase subsidy