Can the throttle line of gy6 be used in Yamaha?

Gy6' s throttle line can be used on Yamaha.

The accelerator line of scooter GY6 engine is suitable for pedal moped GY6 engine and Yamaha. The interface is different from the threaded interface and the bent blade interface, and the interface connecting the carburetor is the same.

The difference between the throttle handle interface is that the thread and the bending piece are actually intuitive. Most models can confirm the interface type as long as they look at the bottom of the handle from bottom to top along the throttle line.

Replacement method of motorcycle throttle line;

Remove the upper cover of the carburetor, pull out the return spring and throttle, pass the throttle pipe through the groove and spring on the throttle, fix the welding spot at the head of the throttle pipe in the groove at the bottom of the throttle, install the throttle into the carburetor at an angle, and then install the upper cover of the carburetor.

The two lines of the motorcycle lead to the throttle handle on the right side of the handlebar, so the top one is the throttle line, which is responsible for controlling the throttle and the oil needle, that is, controlling the throttle.

Next to it is the acceleration pump pipeline, which can make the carburetor spray an oil to the throat when the throttle turns sharply, so as to improve the acceleration when the throttle turns sharply. This accelerator pump only works when the throttle is sharp, but it doesn't work when driving normally or the throttle is slow.

When parking a car equipped with this carburetor, be careful not to twist the throttle, otherwise it will inject gasoline into the cylinder, causing flooding and wasting gasoline.