Can the water electrolyzer really identify the water quality?

Of course. The purpose of water quality electrolyzer is to detect the water quality problems required by users. It is of practical significance to detect the purity of water source, and it is convenient and intuitive to see the actual situation of daily drinking water.

1. Electrolytic cell water quality inspection method, also known as solid precipitation accelerator test method, is a simple water quality inspection method approved by the US Food and Drug Administration (F.D.A), which is used for the basic judgment of polluted water.

Second, the inspection methods and procedures

1. Prepare to test water —— Add half a cup of water to a special "multifunctional water electrolytic beaker", one cup is connected with tap water, and the other cup is filled with RO purified water. Fix the beaker on the beaker base and put it on the table smoothly.

2. Prepare for inspection-put the electrolyzer flat on a special water quality electrolytic beaker and plug in a 220 volt power supply.

3. InspectiON —— Press the power switch button on the electrolytic cell to the ON position to start the inspection.

4. The inspection time of electrolyzer is usually 2-4 minutes. Finally, first press the power switch of the electrolyzer to the off position, and finally take out the electrolyzer.

Extended data:

Matters needing attention

1, when the water electrolyzer is connected to the power supply, the hand shall not be caught on the electrode of the water electrolyzer; Do not put your finger in the test water; Don't let children play with the water electrolyzer, try to be transparent, and it is best not to hold water in a glass.

2. After the water electrolyzer is used, dry the electrode with a dry cloth, wipe the iron and water on the water electrolyzer rod with a fine gauze, and keep it properly.

References:

Baidu encyclopedia-electrolytic cell