How to use sharp-edged cruise?

Fast cruising requires a speed of more than 40 per hour to work, and+-means acceleration or deceleration. When the vehicle speed is above 40, press the RES key to start cruising at a constant speed, press the RES key to accelerate, press the+key and press the RES key to decelerate, and the cruise will be automatically cancelled if the brakes are turned off or switched on.

To put it simply, the working principle of the cruise control system is that the cruise control unit reads the pulse signal sent by the speed sensor and compares it with the set speed, so as to give instructions to the servo and mechanically adjust the throttle opening to keep the vehicle at the set speed. Cruise control taboo: 1. Avoid using winding roads or detours, because you should refuel properly to provide more steering force for normal detours. When the vehicle is cruising at a constant speed, the vehicle automatically keeps the speed unchanged, and the throttle is controlled by the driving computer, which often brings danger to detour driving. 2. Avoid crowded roads or roads with too many vehicles. If you use constant speed cruise on urban roads with dense crowds and vehicles, you will not be able to control the speed in time according to the actual road conditions, which will easily lead to traffic accidents. At the same time, if there are many vehicles or accident-prone sections on the expressway, try to avoid using fixed-speed cruise. 3. Avoid using it in rainy and snowy weather. Because the road surface is slippery in rain and snow, the mobility of the car is reduced and the road vision is not clear. Drivers should control the speed at all times, so for the sake of safety, they can't use fixed-speed cruise.

Million car purchase subsidy