How to disassemble finidi fx35 intake branch in 2007?

1. Remove the body, fix it, open the buckle, open the intake branch pipe, take out the air filter, then remove the whole intake pipe, remove the throttle valve, remove the mounting screws that fall into the intake branch pipe, and remove the branch pipe.

2. The position of the intake branch pipe is between the throttle valve and the cylinder head, but before disassembling this intake branch pipe, the air passage connected with the throttle valve must be disassembled first, and then the intake branch pipe can be disassembled. This step can't be omitted, otherwise the throttle can't move freely.

3. There is a long pipe in the air inlet pipe connected with the air filter. First open the cover, take out the air filter along the intake pipe, then remove the air filter, and then remove the whole intake pipe from the throttle. Then, the throttle can be removed from the branch pipe by removing the screws. At this point, the intake manifold can be removed from the engine.

4. Generally, the intake manifold is installed with six screws, and the intake manifold can be removed from the engine by removing the six screws in sequence.

Finidi FX35 is a sports car SUV. The 20 10 FX35 is equipped with VQ35HR3.5 V6 engine with a maximum power of 244 kW.