What about the click of Baojun 630 engine?

The reason of abnormal noise of Baojun 630 engine is that the throttle device of automobile engine is faulty, which leads to abnormal noise of engine.

The solution to abnormal engine noise is that the throttle fault needs to be overhauled in 4S shop or repair shop to determine the place where the throttle causes the fault and deal with the abnormal engine noise.

In the process of driving, with the excessive carbon deposition produced by gasoline combustion, the negative pressure of the engine will affect the throttle. If the throttle device of the automobile is not properly closed, it will directly lead to the idling jitter of the automobile engine. Therefore, cleaning the throttle regularly is a necessary condition to ensure the normal operation of the engine.

Extended data:

Matters needing attention in the use of automobile throttle are as follows:

The reason of throttle scaling mainly comes from oil vapor, followed by particles and moisture in the air, that is to say, using qualified air filter and removing crankcase ventilation pipe, throttle scaling will be much slower. The crankshaft is built in the crankcase, and the lower part is connected with the oil bottom. The working temperature of this part is about 100 ~ 180.

How long the throttle will be dirty depends on the quality of the air filter, the brand and quality of the engine oil, the condition of the driving section, the temperature, the working temperature of the engine, driving habits and so on. In the future, due to the continuous condensation of oil and gas in the crankcase ventilation pipe and air inlet, the cleaning frequency will increase, and different weather conditions will also affect the speed of throttle scaling.

Engine jitter, increased fuel consumption and weak acceleration are all caused by the throttle.

Baidu encyclopedia-throttling