How to control the fan interval before blowing?

1. Please read the instructions carefully before use, and fully grasp the structure, performance, installation and use of the electric fan, and the maintenance methods and precautions of the bearing heater.

2. Desktop and floor electric fans must use three-core plugs and sockets with safety grounding wires; The ceiling fan should be installed at a higher position on the ceiling without grounding wire.

3. The blades of the electric fan are important parts, and the bearing heater must be protected to prevent deformation during installation, disassembly, scrubbing or use.

4. When operating various function switches, buttons and knobs, the action should not be too fierce or too fast, nor should you press two buttons at the same time.

5. The ceiling fan speed control knob should rotate slowly and sequentially, not in the gear position, otherwise it will easily cause the ceiling fan to heat up and burn the machine.

6, electric fan with oil or dust, should be removed in time. Do not use gasoline or strong alkali solution to wipe, so as not to damage the function of paint parts on the surface of bearing heater.

7. If the electric fan is hot, abnormally burnt, shaking its head is invalid, and the bearing heater is slow, don't continue to use it. Cut off the power supply in time for maintenance.

8. Before collecting the electric fan, thoroughly remove the oil stains and dust on the surface, wipe it with a dry soft cloth, and then wrap it with kraft paper or clean cloth. The storage place should be dry and ventilated to avoid extrusion of bearing heater.

9. When starting the electric fan, it is best to use the fast gear first, and then adjust it to the slow gear after the speed is normal. This not only helps to protect the electric fan, but also saves electricity.

10. When using an electric fan in summer, it is forbidden to blow it for too long after rapid heating and the wind is too strong. It's best to shake your head, slow down, and naturally keep out the wind, but it's better to sleep in the wind.